Inside a new pair of shoes, or on a cardboard swing tag, there is a small icon shaped like a stretched-out animal hide. Sometimes there is a diamond next to it, or a little square that looks like woven fabric. That leather symbol is not a brand logo. It is a pictogram set by law, and it tells you less than most people assume.
The short answer: the hide-shaped symbol means the marked part of the shoe (upper, lining or sole) is at least 80 percent leather. It says nothing about the quality of that leather, how it was tanned or which part of the hide was used. And on bags, belts and wallets it is not required at all.
Where does the leather symbol come from?
The pictograms come from a European directive from 1994: Directive 94/11/EC on the labelling of materials used in footwear. Since then, every shoe sold to consumers in the EU has to state what its three main components are made of. That can be done with pictograms or in written text, and the label must be on at least one shoe of each pair. Pictograms won out because they can be read in every country.
The directive covers footwear, from sandals to boots and trainers. There is no comparable European rule for other leather goods. More on that below.
The four material symbols
A shoe label combines two kinds of pictogram: one for the part of the shoe and one for the material. The material is shown with one of these four symbols.
| Symbol | What you see | Meaning |
|---|---|---|
| Leather | Stretched animal hide | Tanned hide with its original fibre structure more or less intact. A surface finish is allowed, up to 0.15 mm thick. |
| Coated leather | Hide with a diamond inside | Leather with a coating thicker than 0.15 mm, but no more than a third of the total thickness. |
| Textile | Square with a weave pattern | Natural or synthetic fabric, including felt and non-wovens. |
| Other materials | Diamond | Everything else: rubber, plastic, PU, EVA and also faux leather. |
So the difference between leather and coated leather is purely the thickness of the layer on top. A hide with a thin layer of colour or lacquer is still "leather" on the label. Only once that layer goes past 0.15 mm does the hide get a diamond.
Bonded leather, made from ground-up leather scraps, does not meet the definition of leather because the fibre structure of the hide is no longer intact. It does not belong under the hide symbol.
The three parts of the shoe
Next to the material you will see a shoe pictogram with one area highlighted: the upper (the outside above the sole), the lining and insock, or the outer sole. The 80 percent rule applies to each: a material is listed if it makes up at least 80 percent of the surface area, or 80 percent of the volume for the outer sole. If no single material reaches that, the two main materials must be given.
A shoe with a leather upper, textile lining and rubber sole therefore shows three lines: hide, weave, diamond. That is perfectly normal and says nothing bad about the shoe.
What the symbol does not tell you
This is where people get misled. The hide promises that leather was used, but leather is a broad category. The same symbol covers the top layer of the hide with its full grain, and also a split that has been sanded, embossed with a fake grain and given a thin coat of paint. As long as that finish stays under 0.15 mm, it gets the same icon.
If you want to know what you are buying, you need other information. What full-grain leather is and why it is stronger is not on any shoe label. Nor is the difference between top grain, corrected grain and full grain.
The tanning method stays hidden too. By far most leather in the world is chrome-tanned. Vegetable-tanned leather gets exactly the same symbol. If you react to chromium, or simply want to know how your shoes were made, the label tells you nothing.
The label is also silent about the remaining 20 percent. A heel counter, a trim or a strip on the inside can be a different material without having to be mentioned.
The leather symbol on bags, belts and wallets
For bags and small leather goods there is no mandatory material label in the EU like there is for shoes. A seller still cannot mislead you: calling something "leather" when it is plastic counts as an unfair commercial practice. But a fixed pictogram is not part of it.
The hide you do see on bags and belts, on a sewn-in tag or stamped on the inside of a belt, is the maker's own choice. It often comes with "genuine leather", "echt leder" or "vera pelle". That means there is leather in it, nothing more. In English, "genuine leather" is actually often used for the lower grades, because better leather is usually named for what it is: full grain.
Some trade bodies run their own marks for real leather. They are voluntary and differ by country. A symbol on its own is no guarantee. Look at the product description instead: which part of the hide, which tannage, what thickness.
Checking it yourself without a label
If there is nothing on it, or you do not trust what is there, you can see a lot yourself. Look at the cut edge: leather shows a fibrous, dense cross-section, while faux leather often shows a plastic layer on a fabric backing. Look at the grain: real pores are irregular, an embossed pattern repeats. And smell it, although that is less reliable with heavily finished leather.
For a more thorough approach, the seven checks for good leather quality and the piece on telling real leather from faux leather will help.
What to ask instead
On shoes, the hide symbol is a useful first filter: it separates leather from plastic. Do not expect more from it than that. For a bag or belt that has to last for years, two questions to the seller are far more useful: is it full grain, and how was it tanned?
That is why Beocca simply states the material in words for every product: vegetable-tanned full-grain leather. On a model like the Beau leather handbag you will find it in the product details. A seller who cannot answer those two questions often does not quite know what they are selling.